top of page

EXCLUSIVE UK DISTRIBUTOR OF ELECTRATHERM ORC

TURN WASTE HEAT INTO ELECTRICITY

ElectraTherm Power Modules generate power from heat you already produce. We size them with real fleet data, commission them on site and keep the UK fleet running.

Kool Bricks engineer standing between two running ElectraTherm Power Module 75 units

10+ years

of experience with ElectraTherm ORC, including owning and operating the UK’s first unit

Almost 50

UK ElectraTherm units serviced and maintained by us

2.2M+ hours

of worldwide ElectraTherm run data behind every estimate

Exclusive

UK distributor, working directly with ElectraTherm

Factory-trained

at ElectraTherm in Georgia, USA

ELECTRATHERM POWER MODULES

An Organic Rankine Cycle (ORC) Power Module takes low-grade heat that would otherwise be wasted and turns it into electricity you can use on site or export to the grid. Models include the PM75.

Biomass

Use reactor exhaust heat to offset the plant’s own power demand and lower the carbon intensity of the biochar.

Generate electricity alongside your biomass heat, from the same plant.

Biochar and pyrolysis

Use reactor exhaust heat to offset the plant’s own power demand and lower the carbon intensity of the biochar.

Waste incineration

Recover heat from waste incineration and turn it into electricity for the site or the grid.

REAL DATA FOR REAL-WORLD OUTPUTS

Our estimates hit, and often exceed, the stated power output. This is how we get there.

01

Your heat

A short questionnaire on your available heat, temperatures and flows.

02

Smarter Tool modelling

We model your site in the ElectraTherm Smarter Tool, built on over 2 million hours of fleet runtime and factory test-cell data.

03

Five years of weather

Weekly highs, lows and averages from your nearest weather station give best, worst and average outputs.

04

Your ROI

Those weekly figures become a return on investment you can check line by line.

UNDER PROMISE, OVER DELIVER.

Kool Bricks engineer servicing an ElectraTherm ORC expander

PROVEN BEFORE IT SHIPS. SUPPORTED FOR LIFE.

Every PM75 passes a Factory Acceptance Test at its sold design point before it leaves the line. Once it is on site, our engineers service and maintain it alongside the rest of the UK fleet.

■  Factory Acceptance Testing against your quoted performance

 

■  Installation support and commissioning

 

■  Planned servicing and maintenance, including expander generator swaps

Talk to us about service →

RECENT PROJECTS

2 × PM75

Twin Power Modules in parallel

Two PM75s installed in parallel, aiming to go on grid with carbon-neutral electricity in December.

Twin ElectraTherm PM75 Power Modules installed in a UK plant room
Twin ElectraTherm PM75 Power Modules being delivered to site

PM75 · BIOCHAR

Power from pyrolysis exhaust heat

Reactor exhaust heat now offsets the plant’s electricity demand and cuts the biochar’s carbon intensity.

ElectraTherm PM75 running on waste heat from a biochar reactor

RETROFIT · 49 kWe

Back online after six years idle

Idle for six years over grid connection issues, this ORC was bought by a new owner to run on his boiler’s waste heat. We fully rebuilt it with ElectraTherm’s retrofit kit, new PLC and controls and a BITZER semi-hermetic expander generator. It now makes 49 kWe from waste heat.

Ten-year-old ElectraTherm ORC retrofitted with a BITZER expander-generator

ABOUT KOOL BRICKS

We bought, installed and operated the first ElectraTherm ORC in the UK. We still run it ourselves today, and have over 10 years’ experience with ElectraTherm ORC.

So when we size, install or service your Power Module, we do it as operators as well as engineers. Alongside our ORC we run 200 kW of solar, which now charges our fully electric work van.

For the past 3 years we have been ElectraTherm’s exclusive UK distributor. We service and maintain almost 50 units across the UK fleet and work directly with ElectraTherm in Georgia, USA, training regularly at the factory.

Visitors at the Kool Bricks ElectraTherm stand at the Pig and Poultry Fair

GOT WASTE HEAT?

Fill in our Request for Information form and send it to sales@koolbricks.co.uk. We’ll show you what your heat could generate, backed by real fleet data.

bottom of page